Sharp-New-Lathe-1660V-220V-3PH
CAPACITYSwing over bed 16"
Swing over cross slide 8 3/4"
Swing over gap, width 24 3/8", 10 3/4"
Distance between centers 60"
HEADSTOCK
Spindle nose type D1-8 camlock
Spindle bore 3.125"
Spindle speeds (rpm) 40-2,000 (12)/vari
Taper of spindle bore MT #6
Taper of center MT #4
THREADS AND FEEDS
Longitudinal feeds-ipr (18) 0.002- .032"
Cross feed-ipr (12) 0.001-.0094"
Inch threads (36) 4-56 tpi
Metric& Module threads (17) 0.5-7mm
D.P. threads [36] 4-56mm
Leadscrew pitch, diameter 4 tpi, 1 3
New-Dake-Cold-Saw-Technics250
(New) Dake Cold Saw Technics 250Price can be formally quoted upon request.
Our price is FOB ACC which includes incoming freight from Factory to AZ.
In AZ? Think ACC.
We offer new and used metalworking/fabricating equipment and support Arizona's ongoing productivity.
Since 1969, ACC Machinery is family owned and operated in Phoenix, Arizona.
If you need a brake....or saw, mill, lathe, plate roll, bender, drill, punch, ironworker, press brake tooling, laser, plasma cutter or more just call us 60
New Dake SE912 saw
Capacity 9 Rounds, 9 x 12 FlatsHorsepower 1
Voltage 110V, Single Phase
Maximum blade speed 328 fpm
Blade width 1"
Blade length 104.5"
Blade speeds 98/164/246/328 fpm
Solid round 90˚ capacity 9"
Solid round 45˚ right capacity 3-1/2"
Solid round 60˚ right capacity n/a
Solid square 90˚ capacity n/a
Solid square 45˚ right capacity n/a
Solid square 60˚ right capacity n/a
Solid rectangle 90˚ capacity 9" x 12"
Solid rectangle 45˚ right capacity 3-1/2" x 7-1/2"
Solid rectangle 60˚ right
Hydmech VW18 Used
Hydmech vertical tilt frame band sawModel VW18 II
Good condition
2012 mfg date
18” by 22” rectangular cutting cap
1-1/4” blade width
Hydraulic tilt right and left to 60 degrees
Hydraulic vises (2)
Blade coolant system
5hp 240volt/3ph
Specifications are to best of our knowledge and subject to change without notice. Offer for used equipment is in "as is, where is" condition. Please feel free to request visual inspection. ACC terms and conditions apply to all offers and sales. ACC Machinery Co.,
Pirahna Press Brake Used
Used Piranha Hydraulic Press Brake230V/3PH
65 ton bend capacity
8' OA Bend Length
8" Throat Depth
Programmable Ram Depth
Filler BLock
Rear operated manual back gauge
2 front arm supports
miscellaneous tooling
Call to request formal quote: 602-258-7330
Specifications are to best of knowledge.
Used equipment offered in "as is, where is" condition
feel free to visit our showroom for visual inspection
We support Arizona's ongoing productivity with a wide variety of makes, models and tooling for m
Marvel Vertical Mark 8 III
Used Marvel Vertical SawModel Series 8 Mark III
18" x 22" Capacity
60 deg. power tilt left and right
Digital angle display
1-1/4" blade
460V/3PH
Call to request formal quote: 602-258-7330
Specifications are to best of knowledge.
Used equipment offered in "as is, where is" condition
feel free to visit our showroom for visual inspection
We support Arizona's ongoing productivity with a wide variety of makes, models and tooling for metalworking and/or fabricating needs. Since 1969, we are a family
ACC Machinery Showroom In AZ
ACC Machinery in Phoenix Arizona has a variety of fabricating metalworking equipment in stock. Call or visit to see what's in AZ and what can be ordered to meet your needs.Davi Plate Roll New
Davi Plate RollModel MCA 2020
New condition
Used-Geka-Ironworker-110-SD
Used Geka IronworkerModel 110SD
230V/3PH
Hougen Portable Drill HMD917 New
New Hougen HMD917 Portable Magnetic Drill12,000 series Rotabroaches up to 1 1/2 in x 2 DOC
Hougen repair parts (most common)
Prices available upon request.
Call or stop by to see what's currently in stock.
ACC Machinery has been offering and supporting Hougen products over 40 years.
We are the local (AZ) choice for fabricating equipment.
Wellsaw 58BW New
Wellsaw 58BW Portable Bandsaw - New ConditionPrice and more specifications can be quoted upon formal request.
Wellsaw manufactures a full line of high quality metal cutting bandsaws with features and construction that ensure accurate cutting, ease of operation and long service life. Wellsaws are made in Western Michigan USA. This means you get immediate support, both with service parts and technical assistance. They carry a full inventory of parts for models built since 1926 and most orders w
Hougen Magnetic Drill HMD904 New
New Hougen HMD904 Portable Magnetic Drill12,000 series Rotabroaches up to 1 1/2 in x 2 DOC
Hougen repair parts (most common)
Prices available upon request.
Call or stop by to see what's currently in stock.
ACC Machinery has been offering and supporting Hougen products over 40 years.
We are the local (AZ) choice for fabricating equipment.
Sharp Mill LMV49K New
(New) Sharp LMV-49K Vertical MillTABLE
Working surface 9" x 49"
With Premiere Package
230V/3PH
Price can be formally quoted upon request.
All specifications and details are to the best of our knowledge.
Buyer is responsible for all rigging and transportation.
Other machine tools can be seen at www.accmachinery.com or call ACC Machinery at 602-258-7330
Scotchman Shearmaster 610 Used
Used Shearmaster 610 220V/3PHHydraulic Operation
Cutting Capacities:
24" Flat Bar x 1/2"
12" Flat Bar x 1"
16" Flat Bar x 3//4"
Electric Backgauge with stroke control
Hydraulic Holddown
10HP motor
Formal quote with price can be provided upon request.
Specifications are to best of knowledge. Used equipment is offered in "as is, where is" condition with no warranties of any kind. Feel free to contact us for a demonstration appointment.
ACC Machinery Co., Inc. has over 50 years experience in ma
Timesavers 1211-13-0 37 New
(New) Timesavers 37" Metal Finishing Machine, Single HeadModel: 1211-13-0
230V/3PH
Also shown in photo is (New) Timesavers Wet Dust Collect F5-PWDC (offered separately)
Prices and more specifications can be quoted upon formal request.
All Specifications and details are to the best of our knowledge. Feel free to request formal quote.
ACC Machinery has been supporting Arizona manufacturers, structural steel and industrial fabricators for over 50 years and AZ is our only focus. For brakes, shears
Sunrise Ironworker IW66KB New
New Sunrise Hydraulic IronworkerModel: IW-66KB
Electrics: 230V/3Phase
Price can be formally quoted upon request.
All Specifications and details are to the best of our knowledge. Feel free to request formal quote.
ACC Machinery has been supporting Arizona manufacturers, structural steel and industrial fabricators for over 50 years and AZ is our only focus. For brakes, shears, saws, drills, lathes, mill, plasma, rolls, benders, portable punches and so much more....give us a call or visit our show
Show More